Order Now

What to Do After Receiving a Building Inspection Report

A practical guide to reading your inspection report, checking access limitations and organising useful follow-up questions before deciding what to do next.

Team of engineers discussing an inspection report project on a laptop screen

Start by reading the whole building inspection report, checking what was inspected and listing the questions that need an answer. The next step is not automatically to negotiate, arrange repairs or walk away. It is to understand the findings well enough to get the right technical and purchase advice.

A report can contain photographs, descriptions, limitations and recommendations that are difficult to take in during a busy property purchase. A simple follow-up process helps you avoid treating a brief summary as the complete picture. This guide is for buyers organising that process; it does not interpret a particular property report or decide whether you should buy.

1. Check that the report matches the service you ordered

Before concentrating on individual defects, confirm the property address, inspection date and report type. Check whether the document is a building report, timber pest report, combined service or a different inspection. If several reports were supplied, read them as separate documents with their own scope.

Next, compare the report with your inspection agreement. If you expected something that is not covered, ask the provider to explain the difference. For example, an inspection of a unit should not be assumed to include every common area of the complex.

If you are still choosing a service, BeSafe’s guide to what a building and pest inspection covers is a useful starting point.

2. Read the access limitations carefully

Give the limitations section the same attention as the findings. A statement that an area was not inspected describes an information gap. It should not be read as confirmation that the area is free of problems.

Make a short list of the areas or matters that could not be assessed. Then ask which limitations affect the questions you need answered. Useful follow-up questions include:

  • What prevented access or assessment on the inspection day?
  • Could access be arranged without unsafe work or damage?
  • Would another visit answer the question, or is a different specialist needed?
  • What remains uncertain if no further inspection is arranged?

Do not enter a roof space, subfloor or another restricted area yourself to try to resolve a report limitation. Ask the provider about a safe and appropriate next step.

3. Ask the report author to explain unfamiliar findings

Use the report’s own reference numbers or page numbers when asking questions. “What does the recommendation on page 12 mean for my next step?” is easier to answer than a general request to say whether the property is good or bad.

For each issue that concerns you, separate three questions: what was observed, what conclusion the author reached, and what they recommend doing next. If the report uses a classification system, ask the author to explain it. Do not assume a colour, heading or label has the same meaning across different providers’ reports.

Keep the written explanation with the report. Where an answer changes your understanding of a finding, ask for that answer in a form you can refer back to rather than relying on a recollection of a telephone call.

4. Turn recommendations into an action list

A practical action list can have four columns:

Report reference Question or recommendation Who needs to answer? Status
Use the actual page or item number Copy the question you need resolved, without changing its meaning Report author, appropriate specialist or purchase adviser Requested, answered or still unresolved

This is an organising tool, not a defect diagnosis. It makes unresolved matters visible and reduces the chance that a verbal assurance is mistaken for a completed investigation. Where the report identifies an immediate safety concern, follow the stated precautions and seek the appropriate qualified assistance promptly.

5. Obtain specialist advice or repair quotations where needed

A standard building inspection report is not generally a priced repair schedule. The NSW Government’s buyer guidance explains that repair-cost estimates are generally outside the standard report.

If you need a repair quotation, provide the relevant report extract and ask the contractor what investigation they need before quoting. Check whether the quote addresses the same scope as the report recommendation. A price for a cosmetic finish is not automatically a price for investigating or resolving the underlying issue.

Where residential building or specialist trade work requires a licence, check the person or business using the Service NSW contractor licence check. This is a check of the proposed contractor, not a statement about the qualifications of every person named in a report.

6. Bring the reports to your purchase adviser

Your solicitor or conveyancer can consider the contract and legal questions relevant to the transaction. Tell them which matters remain unresolved and the dates by which you need advice. Do not assume that ordering a report, requesting a repair quote or asking the selling agent a question changes a contractual deadline.

For a strata property, keep the physical inspection questions and strata records questions connected. If the records refer to proposed works, ask your advisers which further documents they need. The strata report service and a physical inspection have different purposes.

7. Keep a clear record of what has and has not been resolved

Store the final report version, written clarifications, further reports and quotations together. If access is later arranged or new information becomes available, identify the date of the update. Do not silently replace the original report or mix an old summary with a newer document.

A useful final check is to ask: “Which questions have a documented answer, which require a specialist, and which remain unknown?” That question is more productive than trying to reduce a property to a simple pass or fail.

Frequently asked questions

Does a report containing defects mean I should not buy?

No single general answer applies to every property or buyer. Understand the findings, limitations and recommended investigations, then take the appropriate technical, legal and financial advice for your circumstances.

Can I rely on a repair estimate from somebody who has not inspected the issue?

Ask exactly what the estimate assumes and excludes. Where an inspection or further investigation is needed, treat the unanswered question as unresolved rather than using a preliminary figure as a final quotation.

Who should explain a finding I do not understand?

Start with the report author. They can explain their observations and recommendations within the service they provided and identify where a separate specialist assessment may be needed.

Discuss your inspection requirements with BeSafe

If you are arranging a building and pest inspection in Sydney, tell BeSafe about your property, access arrangements and particular questions before booking. Request a quote or contact the team to confirm the proposed scope and timing.

Featured news articles